This OBD2 engine ECU diagnostics tool utilizes a Wi-Fi/Bluetooth ELM327 adapter to provide comprehensive vehicle diagnostics. The app displays data from various electronic control units (ECUs), offering real-time graphical representations that can be saved and reviewed later. It also displays and resets engine fault codes (DTCs).
You can configure minimum/maximum thresholds for each sensor/PID, triggering an alarm when these limits are exceeded. The app supports both Bluetooth and Wi-Fi ELM327 OBD adapters, though versions 1.5 to 2.1 are recommended due to reported issues with other versions.
Important Note: ELM327 chips are compatible only with OBD2-compliant vehicles:
- USA: 1996 and later
- Europe: 2001 and later (gasoline), 2003 and later (diesel)
- Japan: Approximately 2000 and later
Beyond standard OBDII parameters, the app supports extended parameters for various car brands, including:
- BMW - (DIESEL, E91+AT)
- BYD - (MT20U, ABS)
- Chery - (MT20U, MT20U2, ActecoME797)
- Chrysler/Dodge - (DIESEL, AT)
- Citroen - (C4, C5, Sagem2000, CAN/AT6, EDC16C3, MEV17.4.2)
- Daewoo - (SiriusD42)
- Fiat - (IAW49F, IAW5SF)
- Ford - (ECU, PWM/AT, PWM/ABS, CAN/DIESEL, CAN/AT, CAN/TPMS, CAN/ABS)
- Geely - (MT20U, MT20U2, M797)
- GM/Chevrolet/Pontiac - (ECU, AT, ABS, SiriusD42)
- GreatWall - (MT20U2, EOBD, CAN/4D20)
- Honda - (Fit, Accord, CRV/DIESEL, Insight)
- Jeep - (ECU, DIESEL, AT, TPMS)
- KIA, Hyundai - ~15 PIDs per model (ATF Temperature, Knock detected, etc.)
- Land Rover - (RANGE/3.6L, DISC4/3.0L, DISC3/TD6, FL2/TD4)
- Lifan - (MT20U, MT20U2, ActecoME797, ME1788, ABS)
- Mazda - (ECU, AT, ABS, CAN/TPMS, CAN/SWA)
- Mercedes - (W203/CDI, W169/CVT, W168)
- Mitsubishi - (CAN/ECU, CAN/CVT, CAN/SS4II, CAN/AWC, MUT/OBD, MUT/GDI) *(Note: Pre-2000 Mitsubishi models may lack OBD support.)*
- Nissan - (CAN/ECU, CAN/CVT, CAN/AWD, CAN/METER, CONSULT2)
- Opel - (ECU, AT, ABS, X18XE, Z16XE, Y17DT, CDTI1.6L, CDTI1.3L)
- Peugeot - (MEV17.4.2, EDC16C3, ME744, AL4/CAN, AL4/KWP)
- Renault - (CAN/ECU, CAN/DIESEL, KWP/DIESEL, Sagem2000, KWP/EMS3132)
- Skoda - (CAN UDS TSI/TFSI)
- SsangYong - (KWP/ECU, KWP/AT5, D20DT, CAN/D20DTF, CAN/DSI6)
- Subaru - (ECU, ECU/DIESEL, SSM2, SSM2/DIESEL, SSM2/AT, KWP/ABS)
- Suzuki - (CAN/ECU, KWP/ECU)
- Toyota - (CAN/ECU, KWP/ECU, Prius10,Prius20,Prius30/Alpha,Prius30/AC)
- VAG - (TDI/2.5L, CAN UDS TSI/TFSI)
- Volvo - (D5/P3)
- VAZ - (Yanvar 7.2, Itelma VS5.1 R83, Itelma M73, Itelma M74 KWP/CAN, AT/JATCO, AMT/ZF, Vesta/Largus K4M,H4M)
- GAZ - (MIKAS10.3/11.3, MIKAS11/E2)
- ZAZ - (MIKAS10.3/11.3, MR140)
- UAZ - (MIKAS10.3/11.3, MIKAS11/E2, M86CAN)
Note: Not all listed PIDs for a given brand may be supported by your specific vehicle. You can select desired PID types in "Settings / PID types." Some Mitsubishi models allow control of certain systems (cooling fan, fuel pump, etc.). For MUT parameter reading and actuator control on CAN-bus Mitsubishi models (Montero/Pajero IV, Outlander 2, etc.), configure a profile with the ISO 9141-2 protocol. (Note: Not all Mitsubishi CAN-bus models support ISO 9141-2.) Custom parameter creation is also possible.
Version 3.5.9 (September 30, 2024)
Minor bug fixes and improvements.
Tags : Auto & Vehicles
